WARNING: This product can expose you to chemicals including nicotine, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Flex On The Haters
In the mood for dry herbs and dabs? No need to choose, we have you covered with the Wulf Mods Flex Dual Use Vaporizer! Featuring an easy to swab chamber system, the Flex makes switching between vaping dry herbs and concentrates easier than ever before. Going one step further, the Flex even features 4 different temperatures settings for each of its modes to let you enjoy dry herbs (360˚, 390˚, 410˚, 440˚F) and concentrates (400˚ - 450˚F, 450˚ - 500˚F, 500˚ - 550˚F, 550˚ - 600˚) with a full spectrum of options.
Underneath the hood you will find the Flex has a 1,000mAh battery, haptic feedback vibration to let you know when your clouds are ready, and an icon based screen with full color to make checking out settings seamless. The Flex makes taking your dry herbs and concentrates on the go easy thanks to a compact body and ergonomic hand held design. Check out the 4 available colors and start your Wulf Mods Flex Dual Use Vaporizer journey now!
Loading Concentrate Into The Flex
To load concentrates into the Flex remove the magnetic mouthpiece and make use of the included dab tool to load your concentrate chamber. Make sure not to overload your chamber in order to leave room for proper airflow and thorough vaporization. When completed, replace the magnetic mouthpiece and enjoy!
Loading Dry Herb Into The Flex
Begin your dry herb sessions by first removing the Flex’s magnetic mouthpiece and exposing the dry herb chamber beneath. Make sure that no old materials remain and then gently pack the chamber with your desired amount of dry herbs.
To achieve the best possible vapor, avoid packing too much or too tightly when loading so air can flow properly. Once filled, replace your magnetic mouthpiece to lock the dry herbs in and you are all ready to go!
Using Your Flex In Concentrate Mode
Start dabbing with your Flex by first turning it on by pressing the power button 5x in a row.
Once powered on, remove the magnetic mouthpiece and ensure that you have the Concentrate Chamber loaded in. If the dry herb chamber is in, carefully remove and place it to the side before getting your concentrate one safely loaded in.
The Flex has 2 distinct options for dabbing concentrates with its Manual Mode and Pre-Heat Mode.
Manual Mode allows you to hold down the power button and immediately enjoy a stream of potent dab vapor. The Flex allows you to draw this way for 15s before an automatic heat cut off requires you to pause for a moment before continuing.
Pre-Heat Mode is activated by pressing the power button 2x in a row. This will start a 3 second countdown where the Flex slowly brings your concentrates to heat. Once done, your Flex will vibrate 1x to let you know you are ready to start ripping!
For the next 13 seconds the Flex enters warm mode and keeps your chamber at a consistent heat to allow for maximum vapor production. Once the 13s has concluded, your Flex will vibrate 1x to let you know and then return to standby mode.
Using Your Flex In Dry Herb Mode
To get started in Dry Herb mode press the Flex’s power button 5x in a row to turn your device on. Start your dry herb session by pressing the power button 2x in a row to begin a 20s pre-heat countdown. Once the 20s has passed, your Flex will vibrate 2x to let you know it is all ready to go.
From here you can start drawing from your Flex at your leisure as your device is now in “warm mode” for the next 3 minutes. This gives you the flexibility to enjoy your dry herbs at a pace you can handle and gives you more than enough time to pass the Flex around with your friends. Once the 3 minutes is over, your Flex will vibrate 1x and return to standby mode.
To wrap things up simply press your Flex’s power button an additional 5x in a row and your device will safely shut down.
Adjusting The Flex’s Temperature
Switch between the Flex’s 4 different temperature modes by simply pressing the power button 3x in a row. This will cause your Flex to change to the next setting and the bars on the left hand of your device will change to reflect your current level.
Pre-Heating Your Flex
To Pre-Heat your Flex press the power button 2x in a row. This will start the respective countdowns for your Dry Herbs or Concentrates to ensure you receive a quality hit.
When your Flex has reached heat, it will vibrate 2x and enter warm mode to allow you to draw the vapor and enjoy your materials. Once warm mode ends, your Flex will vibrate 1x and return to standby.
How To Charge The Flex
To charge your Flex Dual Use Vaporizer make use of the included USB-C cable. When your cable is properly plugged in you will notice your Flex’s battery icon will begin to flash and a bar will appear to display your current battery level. When your Flex is fully charged, the battery icon will stop flashing and all four light bars will be displayed.
The first time you charge your Flex, leave it connected for a full 2 hours. Every single time after that never charge your Flex for longer than 1 hour at a time to ensure proper battery life span.
How To Clean the Flex
Clean your Flex by first disassembling both the mouthpiece and chamber from the main battery component. Now take a q-tip or swab dampened with isopropyl alcohol and gently rub away at any built up grime. Always make sure to give your Flex plenty of time to dry before starting your post cleaning session.
What’s Included:
- (1) Wulf Flex Dual Use Vaporizer Battery
- (1) Dry Herb Chamber
- (1) Concentrate Chamber
- (1) Dab Tool
- (1) Cleaning Brush
- (5) Cotton Swabs
- (1) USB-C Cable
Warning: Do not charge with a power bank of 5V or higher. Do not charge in your car. Do not overcharge the battery. Failure to follow these instructions could result in battery damage and frying of the internal system. If the device gets too hot while you are using it, please stop using it for a while. Please avoid using the device while it is charging.
You may also like
More from Wulf Mods
Recently viewed
