WARNING: This product can expose you to chemicals including nicotine, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Fellowship of the Kodo
Become the lord of the clouds by checking out the Wulf Mods X-Ray Series Kodo 510 Variable Voltage Battery! Just like a certain ring carried by Frodo, the Kodo has a built-in key chain loop to allow you to seamlessly carry it around with you! And you are going to want to have the Kodo around, because it has a 400mAh battery, 3 professionally set temperature modes (2.5, 3.0, 3.5v), and a 10s preheat function that is powerful enough to rule all the clouds.
The X-Ray Kodo is housed in a sleek see-through body that gives you an inside look at all your vaporizer's internals and even includes a choice of 5 different spatter color designs including favorites like amethyst and crimson! If you are in the market for a 510 threaded cartridge vaporizer, we highly recommend you pick up a Wulf Mods X-Ray Series Kodo today!
Loading A Cartridge Into the X-Ray Kodo
The X-Ray Kodo is equipped with a universal 510 threaded connection port, so in order to get started all you have to do is twist a compatible cartridge clockwise into your device.
Make sure to gently twist the cartridge until it is completely snug against the top of the X-Ray Kodo to ensure proper vaporization takes place.
Using the X-Ray Kodo
Get started with your X-Ray Kodo sessions by pressing the center power button 5 times in quick succession. When you successfully do this the 3 OLED lights will flash to let you know the device is now all ready to go.
Now all you need to do is inhale from the mouthpiece while holding down the power button and you will be greeted by all the high potency vapor flavors you can handle.
Adjusting Your X-Ray Kodo’s Temperature
To begin adjusting your X-Ray Kodo’s temperature settings, you will have to press the power button 3 times in a row. This will cause the device to switch to the next level.
When correctly input you will notice your LED lights flashing before changing to the next level, the highest (3.5v) being all 3 lights being lit, the lowest (2.5v) being when only 1 light is lit, and then the medium (3.0v) with 2 lights.
Pre-Heating The X-Ray Kodo
To preheat your X-Ray Kodo all you have to do is press the power button 2 times in a row, this will begin the 10 second countdown where your cartridge is preheated.
When it concludes you are ready to hold down the power button again and take a super charged hit ready to rock your world.
How to Charge the X-Ray Kodo
To recharge the X-Ray Kodo you must use a USB-C charging cable.
The first time you charge your X-Ray Kodo make sure to leave it plugged in for a full 2 hours long, this is to set the battery up properly. However, every time after this you should only ever charge your device for a MAXIMUM of 1 hour in order to preserve its life span.
Troubleshooting the X-Ray Kodo
To ensure the longest lifespan for your battery and protect yourself during sessions it's important to be aware of the X-Ray Kodo’s trouble warnings should you come across them.
Auto Shut off Warning - To prevent issues the X-Ray Kodo will automatically shut off if its power button is held longer than 15 seconds and flash its lights 8 times in a row. To get back to vaping simply release the power button and allow it to reset before continuing your cloud blowing.
No Cart Warning - Should a cartridge not be detected and you attempt to use your X-Ray Kodo you will receive a warning of 5 light flashes to alert you to the issue.
Short Circuit Warning - The LED lights will flash 3 times in a row, this is to let you know your device is experiencing a short circuit issue and you should cease using it until it resides.
Low Battery Warning - When your battery is depleted, the lights on your X-Ray Kodo will flash 10 times in a row before ceasing and shutting off. This means you need to plug your device in.
How to Clean Your X-Ray Kodo
Keep your X-Ray Kodo safe and sanitary by periodically wiping down its body with a disinfecting wipe or other type of cloth. For the 510 threaded connection, remove the cartridge and then proceed to clean the grooves with a q-tip gently soaked in isopropyl alcohol.
Make sure to leave plenty of time for drying, you don’t want any excess moisture to get trapped in your connection.
What’s Included:
- (1) X-Ray Series Kodo 510 Variable Voltage Battery
WARNING: Do not charge with a powerbank of 5V or higher. Do not charge in your car. Do not overcharge the battery. Failure to follow these instructions could result in battery damage and frying of the internal system.
You may also like
More from Wulf Mods
Recently viewed
